Mounting The Cisco Unified Meetingplace 8100 Series; Mounting The Cisco Unified Meetingplace 8106 In A 19-Inch Frame-Relay Rack - Cisco 700 MHz Installation And Upgrade Manual

Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
•

Mounting the Cisco Unified MeetingPlace 8100 Series

Before mounting the Cisco Unified MeetingPlace Audio Server in a rack, confirm that you have met all
the requirements in the
on page 1-4
page
The Cisco Unified MeetingPlace 8100 series servers can be mounted in two types of racks:
Cisco Unified MeetingPlace 8106
Cisco Unified MeetingPlace 8112
When mounting the Cisco Unified MeetingPlace Audio Server in a Frame-Relay rack, which is common
in central office locations, the Cisco Unified MeetingPlace 8106 is held along the front of the chassis
and the Cisco Unified MeetingPlace 8112 is held along the center of the chassis.
After mounting the Cisco Unified MeetingPlace Audio Server, mount the breakout box, if applicable.
See the
on page

Mounting the Cisco Unified MeetingPlace 8106 in a 19-Inch Frame-Relay Rack

The Cisco Unified MeetingPlace 8106 ships with two mounting brackets already attached to the front of
it (see
To Mount the Cisco Unified MeetingPlace 8106 in a 19-Inch Frame-Relay Rack
Step 1 Slide the Cisco Unified MeetingPlace 8106 into the front of the rack.
OL-13417-01
Trunk card interface cable assemblies (50-pin Amphenol cables). The number of trunk card
interface cable assemblies that you receive depends on how many and the type of Multi Access
Blades in the Cisco Unified MeetingPlace system. Cisco Systems ships two cables with each
MP-MA-16-PRI and one cable with each MP-MA-4-PRI.
"Environmental Requirements for the Cisco Unified MeetingPlace 8106" section
or the "Environmental Requirements for the Cisco Unified MeetingPlace 8112" section on
1-5.
"Mounting the Breakout Box for T1 PRI and E1 Cisco Unified MeetingPlace Systems" section
2-7.
Figure 2-1). The long sides of the brackets are fastened to the Cisco Unified MeetingPlace 8106.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
Mounting the Cisco Unified MeetingPlace 8100 Series
19-inch Frame-Relay rack.
•
See the "Mounting the Cisco Unified MeetingPlace 8106 in a
19-Inch Frame-Relay Rack" section on page
19-inch Electronic Industries Alliance (EIA) equipment rack.
•
See the "Mounting the Cisco Unified MeetingPlace 8106 in a
19-Inch EIA Equipment Rack" section on page
• 19- or 23-inch Frame-Relay rack.
See the "Mounting the Cisco Unified MeetingPlace 8112 in a
19- or 23-Inch Frame-Relay Rack" section on page
• 19- or 23-inch Electronic Industries Alliance (EIA) equipment
rack.
See the "Mounting the Cisco Unified MeetingPlace 8112 into a
19- or 23-Inch EIA Equipment Rack" section on page
2-3.
2-5.
2-4.
2-6.
2-3