Raster Graphics Presentation Mode Command - HP PCL 5 Reference Manual

Raster Graphics Presentation Mode Command

The Raster Graphics Presentation command specifies the orientation
of the raster image on the logical page.
Default
Range
A value of 0 indicates that a raster row 'will be printed in the positive
X-direction of the PCL coordinate system. (The print direction
translates the PCL coordinate system.)
A value of 3 indicates that the raster graphics will be printed along
the width of the physical page, regardless of logical page orientation.
In portrait orientation, a raster row is printed in the positive X-direction
of the PCL coordinate system and a subsequent raster row is printed
beginning at the next dot row position in the positive Y-direction.
In landscape orientation, a raster row is printed in the positive
Y-direction of the PCL coordinate system and a subsequent raster
row is printed beginning at the next dot row position in the negative
X-direction. Figure 15-5 illustrates presentation mode 0 and 3.
Table 15-2
15-8 Raster Graphics
E
* r # F
C
# =0 - Raster image prints in orientation of logical page
3 - Raster image prints along the width of the physical
page
= 3
= 0, 3
Raster
Presentation
Mode Orientation
0 portrait
0 reverse portrait
0 landscape
0 reverse
landscape
3 portrait
3 reverse portrait
Default Graphics Margin
logical page left bound
logical page left bound
logical page left bound
logical page left bound
logical page left bound
logical page left bound
EN