HP PCL 5 Reference Manual page 158

To delete the character "p" (112 decimal) in a bitmap or bound
scalable font with an ID of 1, send:
(A space is printed in place of the deleted character. Also, the
Character Code command used in the above sequence "...112e...," is
described in Chapter 11.)
To make the soft font with an ID of 2 temporary, send:
To make the soft font with an ID of 2 permanent, send:
To make a copy of the currently invoked (selected) font, with an
ID of 9, send:
The Copy/Assign font control feature can be used to copy either ROM
or RAM fonts into RAM assigning them ID numbers.
Note When the currently selected font is a scalable TrueType ROM font,
E
C
in RAM. Any attempts to download or delete characters within the font
are ignored. An attempt to delete the font merely results in the loss of
the ID number.
9-6 Font Management
E
*c1d112e3F
C
E
*c2d4F
C
E
*c2d5F
C
E
*c9d6F
C
assigns a font ID number, but makes no copy of the font
*c#d6F
E
*c#E
C
EN