Pattern Control Command - HP PCL 5 Reference Manual

Pattern Control Command

The Pattern Control command provides a means for manipulating
user-defined patterns.
Default
Range
For value fields 2, 4, and 5, the Pattern ID (
prior to the Pattern Control command to identify the specific pattern
for the Pattern Control command action.
EN
E
* c # Q
C
# =0 - Delete all patterns (temporary & permanent)
1 - Delete all temporary patterns
2 - Delete pattern (last ID # specified)
3 - Reserved
4 - Make pattern temporary (last ID # specified)
5 - Make pattern permanent (last ID # specified)
= 0
= 0 - 5 (values outside the range are ignored)
E
) command is sent
*c#G
C
Pattern Control Command 13-23