Symbol Set Control Command - HP PCL 5 Reference Manual

Symbol Set Control Command

This command provides a means for making user-defined symbol
sets permanent or temporary, and for deleting them.
Default =
Range =
Downloaded symbol sets default to temporary.
Internal symbol sets cannot be deleted or made temporary.
10-12 User-Defined Symbol Sets
E
* c # S
C
# = 0 -Delete all temporary and permanent user-defined
symbol sets.
1 - Delete all temporary user-defined symbol sets.
2 - Delete current user-defined symbol set
(last symbol set ID code specified).
4 - Make current user-defined symbol set temporary.
5 - Make current user-defined symbol set permanent.
n/a
0-2, 4, 5 (other values ignored)
EN