Pattern Transparency Mode Command - HP PCL 5 Reference Manual

Printer language technical reference manual
Hide thumbs Also See for PCL 5:
Table of Contents

Advertisement

Pattern Transparency Mode Command

The Pattern Transparency Mode command sets the pattern's
transparency mode to transparent or opaque.
Default
Range
A transparency mode of "0" (transparent) means that the white
regions of the pattern image are not copied onto the destination.
A transparency mode of "1" (opaque) means that the white pixels
in the pattern are applied directly onto the destination.
Note
When printing white rules, the pattern transparency is treated as if it
were "opaque"; white rules erase black rules regardless of the
transparency mode.
Refer to the preceding definitions and the discussion of Figure 13-3
and Figure 14-3 for an explanation of the effects of transparency.
EN
E
* v # O
C
#
=0 - Transparent
1 - Opaque
= 0
= 0, 1 (other values cause the command to be ignored)
Pattern Transparency Mode Command 13-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laserjet 4100

Table of Contents