Disconnecting Power - Compaq Netelligent 3024 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10 Setting Up the Repeater
Figure 3-6. Repeaters Connected via the Media Expansion Cable

Disconnecting Power

When you reconfigure a stack (add new repeaters, remove repeaters, or
change repeater positions), be sure you disconnect the power cords from all
affected repeaters.
To power off the repeater, disconnect the power cord from the wall outlet
first. Do not disconnect the power cord from the repeater to power off the
repeater.
WARNING: Do not connect or disconnect the media expansion cables
while the repeaters are powered on. Be sure the repeaters are powered off
before you move the cables.
CAUTION: For pluggable equipment, the power outlet must be installed
near the equipment and must be easily accessible.
EXPANSION PORTS
IN OUT
EXPANSION PORTS
IN OUT
EXPANSION PORTS
IN OUT
EXPANSION PORTS
IN OUT
EXPANSION PORTS
IN OUT