Backplane Segment (Mode 1); Assigning Backplane Segments - Compaq Netelligent 3024 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-6 Configuring/Monitoring the Repeater
NOTE: The numbers below the port LEDs (1-24) represent the port number, not the
backplane segment number for each port group.
The table below lists each LED and its associated backplane segment number
for each port group.
Port LED

Assigning Backplane Segments

Each port group of the repeater is set to Backplane Segment 1 at the factory.
To change a backplane segment assignment for a port group, perform the
following steps:
1. Read through this procedure once before you change backplane
Local—Repeaters have three additional, local (isolated) backplane
segments. Backplane Segments 6-8 are confined to one particular
repeater and cannot be shared with any other repeaters in the stack.
Port Group Assignments
Backplane Port LED
Segment
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
segment assignments.
Table 5-3
Backplane
Segment
9 1
10 2
11 3
12 4
13 5
14 6
15 7
16 8
Port LED Backplane
Segment
17 1
18 2
19 3
20 4
21 5
22 6
23 7
24 8