Compaq Netelligent 3024 User Manual page 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
With this type of cable, the wire connected to Pin 1 must be twisted with the
wire connected to Pin 2 and the wire connected to Pin 3 must be twisted with
the wire connected to Pin 6 as shown above. Pins 4, 5, 7 and 8 are reserved
for telephone and other services.
Each RJ-45 port has the following 10Base-T standard pin-out:
A straight-through cable using the pair combinations shown above provides
the appropriate 10Base-T connection between the repeater and the
workstation.
Table 3-2
Standard 10Base-T Pinout
Repeater Pin #
1
2
3
6
Signal Description
TD+
TD-
RD+
RD-
Netelligent 3024/3124 10Base-T Repeater User Guide
3-7