Local Console Interface - Compaq Netelligent 3024 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial
Port
MEDIA EXPANSION
Figure 6-2. Null-Modem-to-PC Connection

Local Console Interface

When the repeater is powered on, the PC can access the following information
from the 3124 10Base-T managing repeater:
To access this information, connect a PC workstation as described in the
following procedure.
1. Connect a PC to the 3124 10Base-T managing repeater using one of
2. Access a communications software program (such as PROCOMM,
Null Modem
(female-to-female)
Female DB-9
Collision 1 Collision 2
Mode 1 Mode 2
1 2 3 4 5 6 7 8
PORT
SEGMENT 1
MAC address
Board status
Firmware version
the methods shown in Figure 6-1 or 6-2.
etc.) on the PC and configure it to the following settings:
9600 baud
No parity
8 data bits
1 stop bit
Male
DB-25
Collision 3
Mode 3
9 10 11 12 13 14 15 16 17 18 19
SEGMENT 2
Mode 1 - BACKPLANE PORT/SEGMENT
Mode 2 - LINK DISABLE CONFIGURATION
Mode 3 - PARTITION
20 21 22 23 24
UPLINK
SEGMENT 3
PORT 24
Netelligent 3024/3124 10Base-T Repeater User Guide
6-3