Comnet RELIANCE RLGE2FE16R Quick Start Manual

Comnet RELIANCE RLGE2FE16R Quick Start Manual

Substation-rated, enhanced security scada-aware ethernet layer 2 managed switch/layer 3 router with optional 2g/3g & 4g lte cellular radio link, enhanced network security, terminal server, poe+, and 100fx sfp ports

Advertisement

Quick Links

QUICK START GUIDE
RLGE2FE16R
Substation-Rated, Enhanced Security Scada-Aware Ethernet
Layer 2 Managed Switch/Layer 3 Router With Optional 2G/3G
& 4G LTE Cellular Radio Link, Enhanced Network Security,
Terminal Server, PoE+, and 100FX SFP Ports
ComNet product series RLGE2FE16R are substation-rated and industrially hardened
layer 2 managed switches/layer 3 routers, with a unique and highly robust
packet processing SCADA-aware security firewall for the most mission-critical and
demanding cyber-security applications. The RLGE2FE16R is intended for deployment
in environments where high levels of electromagnetic noise and interference (EMI)
and severe voltage transients and surges are routinely encountered, such as electrical
utility substations and switchyards, heavy manufacturing facilities, track-side electronic
equipment, and other difficult out-of-plant installations. Layer 3 routing functionality
allows for the participation and foundation of a core network infrastructure.
The RLGE2FE16R is an ideal platform for deploying a secure communications and
networking gateway for remote electrical utility sites, and other critical infrastructure
applications.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RELIANCE RLGE2FE16R and is the answer not in the manual?

Questions and answers

Summary of Contents for Comnet RELIANCE RLGE2FE16R

  • Page 1 & 4G LTE Cellular Radio Link, Enhanced Network Security, Terminal Server, PoE+, and 100FX SFP Ports ComNet product series RLGE2FE16R are substation-rated and industrially hardened layer 2 managed switches/layer 3 routers, with a unique and highly robust packet processing SCADA-aware security firewall for the most mission-critical and demanding cyber-security applications.
  • Page 2: Table Of Contents

    QUICK START GUIDE RLGE2FE16R Contents About This Guide Intended Audience Related Documentation About ComNet Website Support Safety Overview Hardware and Interfaces Device walkthrough Logical Structure Distance kept for natural air flow Grounding Connecting to a Power Source Wiring DC Input voltage feed...
  • Page 3: About This Guide

    (including monetary losses), that might arise from the use of this document or the information in it. This document and the product it describes are the property of ComNet, which is the owner of all intellectual property rights therein, and are protected by copyright according to the applicable laws.
  • Page 4: Related Documentation

    » SFP Modules Data sheet About ComNet ComNet develops and markets the next generation of video solutions for the CCTV, defense, and homeland security markets. At the core of ComNet’s solutions are a variety of high-end video servers and the ComNet IVS software, which provide the industry with a standard platform for analytics and security management systems enabling leading performance, compact and cost effective solutions.
  • Page 5: Overview

    QUICK START GUIDE RLGE2FE16R Overview Hardware and Interfaces Depending on the RLGE2FE16R hardware variant ordered your switch will be equipped with a combination of Fast Ethernet Ports, Gigabit Ethernet SFPs, Serial ports, and Cellular interfaces » Serial RJ 45 ports supporting RS-232. Max 4 ports (Optional) »...
  • Page 6: Device Walkthrough

    » Ports Labeled 9 & 10 are 100/1000 GE ports. They require SFPs in order to connect fiber/copper interfaces. Many alternate SFP types are supported, including T1 lines, etc, please reach out to support for testing inquirires before implementing any untested or non-ComNet SFP. » Sim Slots 1 & 2 for cellular sim card placement.
  • Page 7: Logical Structure

    Logical Structure Distance kept for natural air flow Proper installation depends on natural air flow for cooling. You must maintain a 10cm distance above and below the ComNet switch for proper air flow. Grounding To install the grounding wire: » Prepare a minimum 10 American Wire Gauge (AWG) grounding wire terminated by a crimped two-hole lug.
  • Page 8: Wiring Ac Input Voltage Connector

    QUICK START GUIDE RLGE2FE16R take care to notice the label on the back of the module. For the DC version there are 2 connection inputs, marked as “PWR A” and “PWR B”. For proper operation it is only necessary to connect one power source, either to “PWR A” or to “PWR B”. However, for redundancy purposes you may connect 2 different power sources one at “PWR A”...
  • Page 9: Power Budget

    QUICK START GUIDE RLGE2FE16R Power Budget The following table details power consumption of the Hardware variants with cellular and serial interfaces. Unit Power feed Max Power [Watt] Version without POE ports Max Power [Watt] Version with POE ports 12 VDC 18.5 24 VDC 18.5...
  • Page 10: Management Over Console

    » Power on device (Boot may take up to 3 minutes). PWR light should be green » Console into Device › Connect to CON port using white ComNet Console Cable. Other console cables will not work as they have a different pinout.
  • Page 11: Ssh

    QUICK START GUIDE RLGE2FE16R » SSH Connection to RLGE2FE16R › Setup PC network to be on the same as the default management network » Example PC Setup: › IP Address of PC: 10.0.0.51 › Subnet mask: 255.0.0.0 › Gateway: 10.0.0.1 (Optional) ›...
  • Page 12: Modes Of Operation

    QUICK START GUIDE RLGE2FE16R Modes of Operation ACE vs GCE GCE interface used for » IP Management to switch (SSH, Terminal, SNMP, FTP) » Routing of access traffic using static entries or OSPF » Mainly used for Switching (Vlans, Interface Troubleshoot, System information, etc.) ACE interface used for »...
  • Page 13: Configuration Through Cli

    QUICK START GUIDE RLGE2FE16R Configuration through CLI At any point of operation you can type ? to get a listing of all available options At any point of typing a command you can press tab to complete a word. Check device software/firmware version typing Show System information (pressing q will end the listing when it shows --more-- , space will continue the page) RLGE2FE16R# show system information Hardware Version...
  • Page 14 QUICK START GUIDE RLGE2FE16R Check VLAN (Virtual LAN) interface using show vlan to see ports associated to vlan RLGE2FE16R# show vlan Switch default Vlan database ------------- Vlan ID Member Ports : Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Gi0/1, Gi0/2, Gi0/3, Gi0/4 Untagged Ports : Fa0/1, Fa0/2, Fa0/3, Fa0/4, Fa0/5, Fa0/6 Fa0/7, Fa0/8, Gi0/1, Gi0/2...
  • Page 15: Create Management Vlan

    QUICK START GUIDE RLGE2FE16R Check Vlan IP addresses by typing show ip interface RLGE2FE16R# show ip interface vlan1 is up, line protocol is up Internet Address is 10.0.0.0/8 Broadcast Address 10.0.0.255 Create management VLAN Give management VLAN an IP address »...
  • Page 16 QUICK START GUIDE RLGE2FE16R RLGE2FE16R(config)# interface fastethernet 0/1 RLGE2FE16R(config-if)# switchport pvid 1 RLGE2FE16R(config-if)# end RLGE2FE16R# wr st Building configuration ... [OK] % startup-config saved successfully RLGE2FE16R# █ » End to exit global config mode » Finish by saving configurations An example of more in depth management interface assignment can be found in the RLGE2FE16R Installation and Operation Manual under the section “Management>Example”...
  • Page 17 QUICK START GUIDE RLGE2FE16R TECH SUPPORT: 1.888.678.9427 QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 17...
  • Page 18 T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET © 2016 Communications Networks Corporation. All Rights Reserved. “ComNet” and QSG_RLGE2FE16R_REV–...

Table of Contents