Advertisement
3-5
Main function switch (adjust button)
●In main screen (ODO). Press the Adjust
●press and hold the Adjust button for 3
●In Trip A screen. Press the Adjust button
●Press and hold the Adjust button for 3 sec.
●In Trip B screen, press the Adjust button
●Press and hold the Adjust button for 3 sec.
●In the fuel / remaining distance screen,
press the Adjust button once to go back to
the main screen(ODO).
Remaining Mileage Learning Procedure:
●Fill the tank completely and in the remaining
●When the fuel level of the bike reach 0, refill
WARNING!
Remaining Mileage might differ from actual mileage and
calculated mileage according to the road condition, vehicle condition, riding method
and so on. Thus the Remaining Mileage is only a suggestion reference to the rider
3-8
Setting screen instruction
+1
+2
+3
+4
+5
+6
+7
+8
button once to enter the Trip A screen.
seconds to switch between the digital
speedometer and the digital Odometer.
once to enter the trip B screen.
to reset Trip A record.
once to enter the Fuel / Remaining
distance screen.
NOTE
If you don't install the fuel wire, the fuel /
remaining distance will not be displayed.
to reset Trip B record.
mileage screen press Adjust button for 10 sec.,
the ODO symbol will flash and remaining mileage
will reset to 0 and restart the learning.
the tank. When this process is done, the ODO
symbol will stop flashing which means the
remaining mileage learning is completed.
●In setting screen, press the Select button to enter the setting.
●The setting screen input order is: input pulse setting,
the tire circumference, the fuel resistance setting,
clock, backlight brightness, internal odometer display,
external odometer setting.
If you don't take any action in 30
seconds, the screen will automatically
return to the main screen.
+9
3-6
Main function switch (select button)
●In the clock screen, press the Select Button
once to switch to the volt screen.
NOTE
●In the volt screen, press the Select Button once
to switch to the clock screen.
3-7
Rpm function instruction
●In the fuel, volt screen, press and hold the
Select Button for 3 seconds to switch to the
RPM screen.
●In the RPM screen, press and hold the Select
Button for 3 seconds to switch to the fuel,
volt screen.
In the RPM screen
●When Fuel Level remain 1 level, the Fuel warning
symbol will flash.
●When Battery Level remain 1 level, the Battery
symbol will flash.
+10
+11
+12
If you don't install the volt wiring, the volt
will not display
main screen
+13
wh642bb03b-P4-2
+15
+16
+17
+18
+19
+20
+14
Advertisement
