ENSIM SENSORS ISS 04 Operating Manual page 16

2.13.
Please pay attention to following matters in order to operate your level switch properly.
Do not remove the float from
connection part. Because its pin
might be damaged.
Do not pull the cable strongly,
otherwise the characteristics
might be changed.
Please do not dip cables
potting into liquids,otherwise
instulation problem may cause.
WARNINGS!!!
Please do not dip cables
potting into liquids,otherwise
instulation problem may cause.
Please keep away from magnetic materials
like iron board ; otherwise the
characteristics might be affected
Do not fasten switch reversely ,
otherwise its characteristics
might be changed.
16
Do not remove the plastic parts
of the bottom of the switch body ,
do not loosen.
In case vapour splash cable
potting points,insulation
problem may cause.
Please avoid using with liquids which
damage materials of parts ,otherwise
quality can not be maintained accurately.