General Safety Information; Acceptable Equipment Uses - Graco BetaCell 241D Operation

GENERAL SAFETY INFORMATION

It is necessary to understand and follow the instructions in this manual to
insure proper and safe operation of the equipment.
As with most mechanical equipment, certain safety precautions must be
taken when the equipment discussed in this manual is operated or
serviced. Severe bodily injury or damage to equipment and property may
result if the instructions and precautions listed throughout this manual are
not followed.
Needless to say, sufficient guidelines cannot be developed to eliminate the
need for good common sense in the use and servicing of this equipment,
and in the use and application of the products this equipment has been
designed to process. Users of this equipment must therefore make their
own determination as to the suitability of the information contained in this
manual to their specific operation and requirements. There should be no
assumption made that the safety measures and instructions contained
herein are all-inclusive, and that other safety measures may not be
required for specific use or application.
The following safety guidelines are generally applicable to the safe and
efficient use of the equipment.

Acceptable Equipment Uses

The equipment is designed for the dispensing of polyurethane foams.
Under no circumstances should any acid or corrosive chemicals be used in
the unit. Consult GUSMER if there is any doubt about the compatibility
of the chemical system to be used in this equipment.
Any use of this equipment other than as indicated above constitutes
misuse unless express written approval is obtained from GUSMER.
4