Left Control Panel View - Dell EMC PowerEdge R540 Installation And Service Manual

Left control panel view

Figure 4. Left control panel without optional iDRAC Quick Sync 2.0 indicator
Figure 5. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 2. Left control panel
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
3 iDRAC Quick Sync 2
wireless indicator (optional)
Status LED indicators
NOTE: The indicators display solid amber if any error occurs.
Icon Description
Indicate the status of the system. For more information, see the
N/A
Status LED indicators section.
Indicates the system health. For more information, see the System
health and system ID indicator codes section.
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Lifecycle Controller logs or system logs, system health status, and
also configure iDRAC, BIOS, and networking parameters. You can also
launch the virtual Keyboard, Video, and Mouse (KVM) viewer and
virtual Kernel based Virtual Machine (KVM), on a supported mobile
device. For more information, see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/idracmanuals.
Dell EMC PowerEdge R540 overview 11