Figure 87. Installing LOM riser card
Next steps
1
If removed, install the low profile, full height X1, or butterfly risers.
2
If removed, install the rear drive cage.
3
Follow the procedure listed in
Related link
Installing an expansion card riser
Installing the rear drive cage
Drive backplane
Depending on your system configuration, the drive backplanes supported in PowerEdge R540 are listed here:
Table 49. Supported backplane options for PowerEdge R540 systems
System
PowerEdge R540
132
Installing and removing system components
After working inside your
system.
Supported hard drives options
3.5 inch (x8) SAS, SATA backplane
3.5 inch (x12) SAS or SATA backplane and 3.5 inch (x2) SAS or
SATA backplane (rear)