Table of Contents
Advertisement
Next step
If applicable, install the air shroud.
Related link
Removing an expansion card riser
Installing the air shroud
Installing the air shroud
Prerequisites
1
Follow the safety guidelines listed in
2
If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
1
Align the tabs on the air shroud with the slots on the system.
2
Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
Safety
instructions.
Installing and removing system components
73
Advertisement
Table of Contents
