Display Activation - ABB AquaMaster Instruction Manual

Electronic Commercial Water Meter
AquaMaster™
Pictorial Displays
Warning annunciators
Left Battery Warning
Sensor Fault
Empty Pipe condition
Mains Failure
Right Battery Warning
Fig. 4.2 Location of Controls

4.3 Display Activation

For normal operation, activate the light sensitive display by first covering the display area totally.
On removing the covering, the display activates and cycles through the programmed set of display
measurements.
Note. For the use of local or remote serial communication and how to alter the displayed set of
measurements, or instrument setup, see the Quick Reference Programming Guide.
IM/AM Issue 13
88888. 8 88.
. 8 . 8 . 8 . 8 0
AB
f t m
0 -
CD
g a l / s m B a r p s i
4 Start-Up And Operation
Upper Display
Date
Forward Flow Total
Reverse Flow Total
Net Flow Total
3
8 m
gal
Lower Display
3
/ h M G D
Time
Flow Velocity
Pressure
35