4.24 Optical Drive (Minitower Position)
To remove an optical drive:
1.
Disconnect power from the system
(section
4.12).
2.
Disconnect the power 1, data 2, and audio 3 cables from the drive. The connector colors might be different
than illustrated.
NOTE:
The audio cable is only required for Linux-based systems.
3.
Lift the green drivelock release lever 1 and gently slide the drive 2 out of the chassis.
78
Removal and Replacement Procedures
(section
4.2), open the access panel
(section
4.9), and remove the front bezel