4.20.2 PCI Card Support
For added protection, some cards have PCI holders installed to prevent movement during shipping.
To remove the card support:
1.
Disconnect power from the system
2.
Remove the two screws 1 retaining the card support and lift 2 it out of the chassis.
To install card support:
1.
Disconnect power from the system
2.
Engage the rear bracket 1 with the holes in the rear of the chassis before rotating it down 2 into position.
3.
Secure the bracket with two screws 3.
70
Removal and Replacement Procedures
(section
4.2) and open the access panel
(section
4.2) and open the access panel
(section
4.9).
(section
4.9).