ZyXEL Communications VMG4005-B50B Overview Manual page 84

Vdsl2 bonding single line bridge

Hide thumbs Also See for VMG4005-B50B:

Table of Contents

Can't access the Web GUI

Ensure the computer is connected to the EMG6726 as previously described.

•

If using DHCP, the Web GUI access IP will be the same as your computer's Gateway

Address (default: 192.168.1.1).

•

Try clearing your computer's browser cache to remove any cached info from other

routers or devices.

•

Try using a computer command prompt or app to ping the devices' access IP

address.

•

Try using an alternate form of administration, such as:

Telnet (default port: 23 with a Telnet client like puTTY)

•

SSH (default port: 22 with an SSH client like puTTY)

•

HTTPS/ SSL (default port: 443 with a standard web browser)

•

If you cannot access the router through the Web GUI, you can hold in the hardware

reset button on the back of the unit for ~10 seconds (until the Power LED starts

blinking) to reset the unit back to factory defaults.

Table of Contents