Table of Contents
Advertisement
Configuring an Interface (Cont'd)
•
Typically, NAT Enable should be set to Enable for proper WAN-to-LAN IP
translation.
Enabling Fullcone NAT Enable may help with passing SIP and multicast traffic
•
on an interface, but is less secure than the default Symmetric NAT used by
interfaces.
If the interface is routed and being used for IPTV or other multicast traffic,
•
check IGMP Proxy Enable.
If the interface is being used as the primary data connection for LAN users,
•
check Apply as Default Gateway.
Note: only one interface can use the Apply as Default Gateway option.
•
© 2020
43
Advertisement
Table of Contents
