Address Configuration for Dual Stack
or IPv6 Only
Finally, in the IPv6 Address area:
Decide if you need to Obtain an
•
IPv6 Address Automatically or use
a Static IPv6 Address.
•
Enable MLD Proxy Enable if the interface
is to be used for IP video.
Apply as Default Gateway if the interface
•
will be the primary data interface.
•
Decide if you need to Obtain IPv6
DNS Info Automatically or Use the
Following Static IPv6 DNS Address.
•
When finished, click Apply at the
bottom of the window to save
your changes.
© 2020
52