ZyXEL Communications VMG4005-B50B Overview Manual page 38

Vdsl2 bonding single line bridge

Hide thumbs Also See for VMG4005-B50B:

Table of Contents

Configuring a Broadband Interface

•

First, Enable the interface and Name it.

•

In the Type field, you can choose from the DSL interfaces, depending on the deployment/ rollout.

Then, select either Routing or Bridging modes, depending on the requirements for the interface

•

We discussed bridged interfaces in the last section

•

Select either IPoE or PPPoE encapsulations depending on the COE.

•

For more info on the IPv4/IPv6 Mode dropdown menu, refer to the IPv6 section later in this guide.

For the moment, unless otherwise noted, we'll discuss IPv4 settings.

Table of Contents