ZyXEL Communications VMG4005-B50B Overview Manual page 74

Vdsl2 bonding single line bridge

Hide thumbs Also See for VMG4005-B50B:

Table of Contents

DSL LEDs

Problem: The DSL light will not turn on.

Solution: Ensure that the router is connected to a phone wall jack

using the included cable. Also, ensure DSL service is active on that

line. Otherwise, replace the telephone cable to the router as it may

be faulty.

Problem: The DSL light does not stop blinking.

Solution: The DSL light should blink after the unit boots up and

synchronizes with the DSLAM. If it does not stop blinking, the DSL line

may not be connected or functioning, the VCI and VPI (for ADSL)

may not be properly configured, or advanced diagnostics may be

necessary to find the problem.

Table of Contents