Customizing The Monitor Display - HP xw4100 Getting Started Manual

Software Setup
For those workstations supporting Energy Star and have it enabled, the
power management features will be set as follows:
Monitor—goes into Standby mode after 20 minutes of inactivity.
(15 minutes for the xw4100)
System—goes into Standby mode after 20 minutes of inactivity.
(15 minutes for the xw4100)
Hard Drive—goes into power savings mode after the system goes
into Standby mode.
NOTE: Should you have to restore the operating system, Energy Star
settings (if applicable) will need to be reset after the restore.
NOTE: For more information on Energy Star, refer to the Service and
Technical Reference Guide web link located on the Documentation
Library CD
(www.hp.com/support/workstation_manuals).
Accessibility
HP is committed to designing products, services, and programs with
improved usability and accessibility for all customers.
HP products with Microsoft Windows XP preinstalled are designed for
accessibility, and these products are tested with industry-leading
Assistive Technology products.
HP Accessibility—connecting everyone to the power of technology.

Customizing the Monitor Display

You can manually select or change the monitor model, refresh rates,
screen resolution, color settings, font sizes, and power management
settings. To do so, right-click on the Windows Desktop, then click
Properties
the online documentation provided with the graphics controller utility or
the documentation that came with your monitor.
2–4
to change display settings. For more information, refer to
www.hp.com Getting Started Guide