Quick Setup
After unpacking your workstation, locate an accessible workspace to set
up the workstation and connect the mouse, keyboard, monitor, and
power cables to your workstation. Connect the power cables from the
monitor and workstation to a power outlet.
WARNING: On the xw4100, it is important that you set the power
voltage select switch, on the back of the unit, to the correct voltage
setting before introducing power to your workstation.
NOTE: Connect other components, such as a printer, according to the
instructions included with the device.
For more information on your workstation, refer to the Documentation
Library CD or visit www.hp.com/go/workstationsupport.
Getting Started Guide
Hardware Setup
www.hp.com
1
Voltage
Switch
1–1