HP xw4100 Getting Started Manual page 49

Activity
Red Power LED
blinks five times,
once every second,
followed by a two
second pause.
Red Power LED
blinks six times,
once every second,
followed by a two
second pause.
Red Power LED
blinks seven times,
once every second,
followed by a two
second pause.
Getting Started Guide
Possible
Beeps Cause
5 Pre-video
memory error
6 Pre-video
graphics
error.
7 System board
failure (ROM
detected
failure prior to
video).
www.hp.com
Troubleshooting
Recommended
Action
1. Reseat DIMMs. Power
on the system.
2. Replace DIMMs one at
a time to isolate faulty
module.
3. Replace third-party
memory with
HP memory.
4. Replace the system
board.
For systems with a graphics
card:
1. Reseat the graphics
card. Power on the
system.
2. Replace the graphics
card.
3. Replace the system
board.
Replace the system board.
4–15