Opex OMATION ENVELOPENER 210 Series Operator's Manual page 110

2. Unplug the power cord and push the circuit breaker toward the machine to
close it (Figure 4-20).
Circuit Breaker Open
Push
3. Plug the power cord back into the machine.
4. Verify the machine has power and operates normally.
If the circuit breaker pops back out, call OPEX to have the machine
serviced (See
Operation
Omation Series 210™ Envelopener® Operator Manual
This PDF has been created for exclusive use for
Pitney Bowes
Figure 4-20: Closing the circuit breaker
"Contacting OPEX" on page
OPEX Corporation
Circuit Breaker Closed
2).
55