HP rx5670 Hardware Installation Manual page 16

Server Overview and Unpacking
Unpacking the Server
5. Insert the lifter forks under the server.
6. Carefully roll the lift forward until it is fully positioned against the side of the server.
7. Slowly raise the server off the pallet until it clears the pallet cushions.
8. Carefully roll the lifter and server away from the pallet. Do not raise the server any higher than
necessary when moving it over to the rack.
Installing the Server into a Rack
Any hp server rx5670 that is to be installed into a rack is shipped with equipment slides. With every set of
slides comes an installation guide: hp server rx5670 rack installation guide. Follow the steps in this
installation guide to determine where and how to place the server into the rack.
16
Chapter 1