HP rx5670 Hardware Installation Manual page 43

10. Use the EL command to enable/disable Web Console and telnet access after the MP has been reset.
Management Processor Commands
Table 3-1 Management Processor Commands and Descriptions
Command
AC Alert Display Configuration
CA Configure Asynch/Serial Ports
CL View Console Log
CG Certificate Generator
CO Return to Console Mode
CSP Connect to Remote management processor
DC Default Configuration
DF Display FRU Information
DI Disconnect Remote or LAN Console
EL Enable/Disable LAN/Web Access
ER Enable/Disable Remote Modem
EX Exit management processor and Disconnect
HE Display Help for Menu or Command
IT Inactivity Timeout Settings
LC LAN Configuration
LOC Locater LED Control
LS LAN Status
MR Modem Reset
MS Modem Status
PC Remote Power Control
PG Paging Parameter Setup
PR Power Restore Policy Configuration
PS Power Management Module Status
RB Reset BMC through Toggle GPIO Pin
RS Request BMC to Reset System through RST Signal
SDM Set Display Mode (hex or text)
SE Log Into the System
Chapter 3
Description
Cable Connections
Core I/O Connections
43