Installing Mass Storage Devices; Connecting Devices - HP X Class 500/550MHz User Manual

Installing Mass Storage Devices

Connecting Devices

If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables. The
figure below shows all data cables and power connectors provided.
Cable with one connector
for 3.5-inch Flexible Disk
Drive
16-bit SCSI with five
68-pin SCSI
16-bit External 68-
pin SCSI connector
8-bit SCSI with two
50-pin SCSI
Chapter 2
How to Install Accessories In Your HP Visualize Personal Workstation
Installing Mass Storage Devices
34-pin connector
68-pin SCSI connectors
Cable with two 40-pin
connectors for IDE Drives, such
as CD-ROM Drives, Zip Drives
or Hard Disk Drives
Power Cables for Hard
Disk Drives, Zip Drives,
Tape Drives, CD-RW,
and
CD-ROM Drives.
Power Cable for 3.5-inch
Flexible Disk Drive
39