Other Features - HP X Class 500/550MHz User Manual

POST Phase
Troubleshooting Your HP Visualize Personal Workstation
Using HP MaxiLife to Diagnose Problems
Following these checks, the POST (Power-On Self Test) sequence is
initiated. One of the following screens will appear in this phase:
HP KAYAK XU
No errors occurred.

Other Features

HP MaxiLife can also be configured to:
• Display the configuration details of your Personal Workstation
required to obtain support (System info.)
• Indicate POST (Power-On Self Test) steps during the power-on phase
(Boot steps)
• Perform diagnostic tests on your Personal Workstation's various
hardware components and display the results (Diags).
To configure your HP LCD:
1. Ensure that your Personal Workstation's power cord is connected to a
grounded outlet.
In this state, your Personal Workstation's hardware management
chip is active, even if your system is not powered on.
2. Press one of the LCD control buttons. The following menu is
displayed.
System info
Boot steps
Next
3. Use to scroll down through the menu items and
required menu item.
46
Error!
POST XXXX
A POST error occurred. Refer to the
Upgrade and Configuration Guide
for more information.
Go
Diags
Exit
Next Go
to select the
Chapter 3