Connecting To A Network - HP X Class 500/550MHz User Manual

Setting Up and Using Your HP Visualize Personal Workstation

Connecting to a Network

Your Personal Workstation has a 10/100BT LAN interface adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and
automatically detects which network type is being used.
1. Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2. Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
PC Workstation to the network.
For further instructions on configuring your network connection, refer to the
Upgrade and Configuration Guide available on HP's Web site.
Refer also to the online Network Administrator's Guide (provided on an HP
CD-ROM) for further instructions on setting up your Personal Workstation
for a LAN connection.
Chapter 1
Connecting to a Network
The board shown
here is a combined
SCSI/LAN board.
15