Set Speaker Volume; Setup Voice Mail; Make Calls - Cisco 7940 User Manual

S S V
ET PEAKER
1. Press the SPEAKER button.
-
2. Press the
handset volume.
3. Press the Save soft key to save changes and then the SPEAKER button to finish.
S V M
ETUP OICE
1. Press the messages button.
2. Enter 0112358 as the default password when prompted.
- If you are not prompted to enter the password, it is likely that voice-mail is
not configured for your line. Contact UIS Tech Support at (217)206-6000 or by
email at
3. Follow the prompts to record your greeting and personalize your voicemail setup.
4. For a detailed map of voicemail buttons, see Appendix A: Voicemail Button Map.
M C
AKE ALLS
Pick up the handset.
OR
Press the line button of the phone line you wish to use to begin to make the call.
OR
Information Technology Services, UIS
OLUME
button to lower the headset volume. Press the
AIL
TechSupport@uis.edu
SPEAKER
messages
.
+
button to increase the
6