Epson WorkForce WF-2880 Series User Manual page 193

Solving Problems
❏ You may not be able to connect to the access point when the access point has multiple SSIDs and devices are
connected to different SSIDs on the same access point. Connect the computer or smart device to the same SSID
as the printer.
❏ An access point that is compliant with both IEEE802.11a and IEEE802.11g has SSIDs of 2.4 GHz and 5 GHz. If
you connect the computer or smart device to a 5 GHz SSID, you cannot connect to the printer because the
printer only supports communication over 2.4 GHz. Connect the computer or smart device to the same SSID as
the printer.
❏ Most access points have a privacy separator feature that blocks communication between connected devices. If
you cannot communicate between the printer and the computer or smart device even if they are connected to
the same network, disable the privacy separator on the access point. See the manual provided with the access
point for details.
>
When You Cannot Make Network Settings
>
Cannot Connect from Devices Even Though Net
193
...