If The Cd-Rom Drive Has A Problem - HP Vectra Vli 8SF Supplementary Manual

If the CD-ROM Drive Has a Problem

CD-ROM Drive Does Not Work
1 Check that all cables (data, power and audio) have been properly
connected.
2 Check that a CD-ROM is inserted in the drive.
3 Check that the drive's lens is not dirty or damaged.
Verify that the drive is declared in the HP Setup program (
•
IDE Devices
Verify that the
•
Local Bus IDE Adapter
the HP Setup program (
IRQ 14/15
accessed by pressing
4 If you intend to boot from the CD-ROM drive, verify that:
•
Start From IDE CD-ROM
(
Security Boot Devices Security
at startup.
•
ATAPI CD-ROM
program (
Boot
pressing F2 at startup.
•
Removable Media
5 For further information refer to the manual supplied with the
drive.
CD-ROM Drive is Idle
If the CD-ROM drive does not appear to be working, try accessing the
disk by clicking on the CD-ROM drive icon or drive letter assigned to
the CD-ROM drive by your operating system.
), accessed by pressing
F2 at startup.
is enabled in the HP Setup program
is placed before
Boot Device Priority
is prioritized after pressing F8 at startup.
1 Troubleshooting Your PC
More Troubleshooting for Drives
at startup.
F2
parameter is set to
Advanced IDE Devices
), accessed by pressing
in the HP Setup
Hard Drive
) accessed by
Advanced
Both,
),
F2
37