If There is a LAN Problem
Problem
The LAN feature does not work.
The Wake On LAN feature does not work.
You have installed a LAN accessory board that
supports the Wake On LAN feature but this
feature does not work.
You have installed a LAN accessory board but it
doesn't work.
1 Troubleshooting Your PC
Solution
•
Check that the Integrated Network
Interface is enabled in the Setup program's
Advanced
PCI Configuration
menu.
•
Ensure there are no IRQ conflicts with other devices.
Check that the Power On Network
Interface is enabled in the Setup program's Power
menu.
There is no Wake On LAN connector on the system board. This
HP PC does not support Wake On LAN with LAN accessory
boards.
Check that:
1
The Integrated Network Interface
is disabled in the Setup program's Advanced
PCI Configuration menu.
2
There are no IRQ conflicts with other devices.
3
The accessory board is correctly installed in the slot.
4
There are no bent connector pins.
5
You have installed the correct drivers (refer to the board
manufacturer's web site).
The relevant fields in the HP Setup program are correctly
6
set.
7
The software installation steps have been followed
correctly.
If There is a LAN Problem
25