Download
Share
Print this page
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Adapter
  5. Vectra VLi 8
  6. Installation manual

HP Vectra VLi8 Installation Manual

Ibm turbo 16/4 token ring isa adapter
Hide thumbs Also See for Vectra VLi8:

Advertisement

Quick Links

Download this manual See also: Handbook, User Manual
IBM Turbo 16/4 Token Ring ISA
Adapter
Installation Guide

Advertisement

loading

Related Manuals for HP Vectra VLi8

Summary of Contents for HP Vectra VLi8

  • Page 1 IBM Turbo 16/4 Token Ring ISA Adapter Installation Guide...
  • Page 2 Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. is a trademark of Intel Corporation. Pentium® is a registered trademark of Intel Corporation. Hewlett-Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France ©1999 Hewlett Packard Company...
  • Page 3 On all systems: before installing LAN card, go into Bios setup and set PnP OS field to NO. • This network card failed HP tests on Vectra VEi7 and VEi8. • Installation on Win 3.11 with Novell server fails on Vectra VLi8. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
  • Page 4 General information to read before installing 1 Install the NIC then power up the system 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
  • Page 5 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token-Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token-Ring ISA adapter. 3 Power on the machine and start Windows 95SR2.5 and the Token Ring card will be recognized as “IBM Turbo 16/4 Token Ring ISA Adapter”.
  • Page 6 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click “OK”. 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Accept the default Network Protocols and the Primary Network Logon (Client for Microsoft Networks) as seen below and click on “OK”.
  • Page 7 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token-Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token-Ring ISA adapter. 3 Power on the machine and start Windows 95SR2.5 and the Token Ring card will be recognized as “IBM Turbo 16/4 Token Ring ISA Adapter”.
  • Page 8 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click “OK”. 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Accept the default Network Protocols and the Primary Network Logon (Client for Microsoft Networks) as seen below and click on “OK”.
  • Page 9 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token-Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token-Ring ISA adapter. 3 Power on the machine and start Windows 95SR2.5 and the Token Ring card will be recognized as “IBM Turbo 16/4 Token Ring ISA Adapter”.
  • Page 10 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click “OK”. 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Insert the “Novell Client for Windows 95” CD in the CDROM and execute “Setup.exe”.
  • Page 11 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token-Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token-Ring ISA adapter. 3 Power on the machine and start Windows 95SR2.5 and the Token Ring card will be recognized as “IBM Turbo 16/4 Token Ring ISA Adapter”.
  • Page 12 7 Insert the Windows 95 CD into the CD-ROM drive, specify the path and click “OK”. 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Insert the “Novell Client for Windows 95” CD in the CDROM and execute “Setup.exe”.
  • Page 13 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a PCI slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA adapter.
  • Page 14 8 Insert the IBM “Turbo 16/4 and Auto Wake Token-Ring ISA Adapter (Disk 2)” disk into the floppy drive. 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM Turbo 16/4 Token Ring ISA adapter” and click on “OK”.
  • Page 15 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a PCI slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA adapter.
  • Page 16 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM Turbo 16/4 Token Ring ISA adapter” and click on “OK”. 11 With “IBM Turbo 16/4 Token Ring ISA adapter” listed in the “Network Adapters”...
  • Page 17 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a PCI slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA adapter.
  • Page 18 8 Insert the IBM “Turbo 16/4 and Auto Wake Token-Ring ISA Adapter (Disk 2)” disk into the floppy drive. 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM Turbo 16/4 Token Ring ISA adapter” and click on “OK”.
  • Page 19 7 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter Connecting to a Novell NetWare 3.12 Server 28 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 29 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
  • Page 20 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a PCI slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA adapter.
  • Page 21 8 Insert the IBM “Turbo 16/4 and Auto Wake Token-Ring ISA Adapter (Disk 2)” disk into the floppy drive. 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM Turbo 16/4 Token Ring ISA adapter” and click on “OK”.
  • Page 22 8 Installing the IBM Turbo 16/4 Token-Ring ISA Adapter Connecting to a Novell NetWare 4.11 Server 28 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 29 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
  • Page 23 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA card. 3 Log into Windows NT with administrator privileges.
  • Page 24 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window. 9 From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”.
  • Page 25 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA card. 3 Log into Windows NT with administrator privileges.
  • Page 26 9 From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”. 10 Set the path to “A:\” in the “Insert Disk” dialogs box, and then insert the “Turbo 16/4 and Auto Wake Token-Ring ISA Adapters (Disk 2)” diskette in the floppy drive and click “OK”.
  • Page 27 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into a ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA card. 3 Log into Windows NT with administrator privileges.
  • Page 28 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window. 9 From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”.
  • Page 29 Device Configuration Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the IBM Turbo 16/4 Token Ring ISA adapter into an ISA slot. 2 Connect network cable media to the IBM Turbo 16/4 Token Ring ISA adapter.
  • Page 30 8 Type the path “A:\WFW” in the “Install Driver” dialog box, and then insert the IBM Turbo 16/4 and Auto Wake Token Ring Adapter (Disk 2) into the floppy drive, and click “OK”. 9 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2/3/ODI” in the “Unlisted or Updated Network Adapter”...