Table of Contents
Advertisement
Mintower Model
1 Remove the computer's cover (page 3).
2 Remove the Front Bezel:
a Move the computer to the edge of a table, so that there is enough
room to place your hand under the front bezel.
b Standing in front of the PC, place one hand on top of the bezel and
the other hand under the base of the bezel. Then carefully lever
it away from the chassis.
3 Remove the Status Panel:
a Disconnect the status panel cable from the system board.
b From the top of the status panel, carefully push down until it
comes free of the chassis. Then from the bottom of the status
panel push upwards until becomes free, then pull the status panel
away from the chassis.
Vectra VE 7 (Celeron Processor) — Replacing Hardware Components
Removing the Status Panel
English
7
Advertisement
Table of Contents
