Table of Contents
Advertisement
Vectra VE 7 (Celeron Processor) — Replacing Hardware Components
Replacing the Power Supply
Minitower Model
WARNING
For your safety, never remove the PC's cover without first
removing the power cord from the power outlet, and any
connection to a telecommunications network.
Always replace the cover before switching on the PC again.
1 Remove the computer's cover (page 3).
2 Remove all internal power supply connectors.
Hard drive(s)
CD-ROM drive
3 While supporting the power supply unit with one hand, remove its
retaining screw.
4 Remove the power supply unit with the tray by pulling it towards the
front of the PC. Then undo the four screws on the power supply unit.
5 Insert the new power supply unit. Secure it in position using the
screws that you removed above.
34
English
Floppy drive
Main power
(on system board)
Advertisement
Table of Contents
