4 Carefully remove the metal filler plate from the chassis. Unlatch the
filler first from one side, and then pull it out. Be very careful not to
hurt your fingers when you do this. You need to use a screwdriver to
help you to unlatch the plate.
5 If the new drive has a tray, attach the drive onto the tray. Many
devices, such as the HP Zip drive, require an HP-supplied tray before
they can be installed. CD-ROM drives do not require a tray.
Attach drive to tray
(This example shows a Zip drive)
Vectra VE 7 (Celeron Processor) — Replacing Hardware Components
Installing a CD-ROM, Tape or Zip Drive in a Front Shelf
English
21