Table of Contents
Advertisement
Vectra VE 7 (Celeron Processor) — Replacing Hardware Components
Installing a CD-ROM, Tape or Zip Drive in a Front Shelf
Minitower Model
WARNING
To avoid electric shock and harm to your eyes by laser light, do
not open the laser module. The laser module should be serviced
by service personnel only. Do not attempt to make any
adjustment to the laser unit. Refer to the label on the CD-ROM
drive for power requirements and wavelength. This product is a
class 1 laser product.
1 Switch off the display and computer, and disconnect the power
supply cables and any telecommunications cables.
2 Remove the computer's cover (page 3).
3 Remove the Front Bezel:
a Move the computer to the edge of a table, so that there is enough
room to place your hand under the front bezel.
b Standing in front of the PC, place one hand on top of the bezel and
the other hand under the base of the bezel. Then carefully lever
it away from the chassis.
20
English
Advertisement
Table of Contents
