Minitower Models - HP Vectra VE6 8 Supplementary Manual

Removing the Cover
3 Tighten the three thumb screws at the back of the PC.
4 Reconnect all cables and power cords.

Minitower Models

1 Switch off the display and PC.
2 Disconnect all power cords and any telecommunications cables.
3 Unscrew the three thumb screws at the back of the PC. If it is the first time
you are removing the cover, you will probably need to use a screwdriver
to loosen the screws.
4 While standing at the back of the PC, slide the cover towards you by about
15 mm (1/2 - 3/4 inch) and then lift it off the PC chassis.
Step 4
Step 2
Step 3
Step 3
Removing and Replacing the Cover
11