Edimax IC-7010 Series Manual page 70

2.5.4 FTP Configuration
You can set FTP server‟s parameters here.
The descriptions of every setting in this menu will be given below:
Item
FTP Server
FTP Port
User Name
Password
Remote Folder
Passive Mode
Description
Input the IP address or host name of the FTP server you
wish to use here.
Input the port number of the FTP server you wish to use
here.
Input the user name of the FTP server you wish to use
here.
Input the password of the FTP server you wish to use
here.
Input the remote folder name on the FTP server here. If
nothing is specified here, all uploaded image files will be
placed in FTP server‟s root directory.
Please ask FTP server‟s administrator to know which
folder you should use. Certain user name may have
restrictions and therefore can not place the file in the
directory not owned by the user.
Select „Enable‟ to use passive mode to send file, or select
„Disable‟ to not to use passive mode to send file.
Some FTP servers require passive mode, if you don‟t
know, please ask FTP server‟s administrator; most of
FTP servers will work fine with both modes, but if you
70