Table of Contents
Advertisement
The descriptions of every setting in this menu will be given below:
Item
Pan/Tilt Speed
Video Type
Frequency
Flip Mode
Brightness /
Saturation /
Sharpness
Description
Specifies the moving speed when you use pan /
tilt function to point the camera to a new direction.
Available options are 1 (fastest) to 5 (slowest).
Select 1 to move the camera by a faster speed,
but you will not be able to control the movement
precisely. If you wan to move the camera in a
more accurate manner, select a slower speed.
Specifies video encoding type. Available options
are „MPEG4‟, „MJPEG‟, and „H.264‟. Different
encoding type requires different bandwidth, and
provides different video quality.
If the place where this IP camera points to has a
(or more) fluorescent light(s), the image may look
flashing. In this case, you can adjust this setting
to the frequency of electrical power; this can
improve the image quality effectively. If you
don‟t know which one you should use, just try any
of them and select one with less flicker.
If you‟re not putting this camera on a horizontal
surface but hang the camera on the ceiling or
wall, you can use this function to rotate the
displaying image.
Select brightness, saturation, and sharpness
from dropdown menu, and click „ - ' or „ + „ button
to increase or decrease brightness / saturation /
sharpness setting value. In certain environment,
adjust brightness, saturation, and / or sharpness
will help improve video quality.
37
Advertisement
Table of Contents
