Edimax IC-7010 Series Manual page 67

Sensitivity
Refresh
Save
To change the motion detection region, you can „resize‟ and „reposition‟ it:
Move the mouse cursor to the eight dots located at the border of motion
detection region, and the mouse cursor will switch to
can click and hold mouse button and move the mouse to resize the motion
detection region.
To move reposition the motion detection region, move the mouse within the
motion detection region, and the mouse cursor will switch to
hold mouse button and move the mouse to reposition the motion detection
region.
Move the slide bar to change the motion detection
sensitivity setting: Drag the slide to the right to increase
sensitivity (camera will detect minor changes in the
image), and drag the slide to the left to decrease
sensitivity (camera will only detect major changes in the
image).
In case the objects of the image captured by the camera
moved, click this button to reload the image captured by
camera, so you can decide the motion detection region
more precisely.
Save motion detection region settings.
67
, , or . You
. Click and