Edimax IC-7010 Series Manual page 95

You can put the mouse cursor on a certain component and see its button name,
and here‟re detailed descriptions of all buttons:
Item
Video displaying
area
Language
Display layout
Full screen
Scan
Zoom out
Zoom In
PTZ control
Home
Recording
Configure
Description
The image of all connected cameras will be displayed
here.
Select a language from this dropdown menu to change
display language.
Change camera image display layout (Click a layout icon
to change camera display layout). There are 8 kinds of
available display layouts.
Click this button to switch to full screen mode (only
display all camera‟s image), press „ESC‟ key to quit full
screen mode.
Click this button and the IP camera surveillance software
will switch displaying the image of all connected camera
automatically. Click this button once to activate scan
function (scan icon will become blue
stop scanning (scan icon will become white
Zoom-out (To see more objects).
This function is only available for supported cameras.
Zoom-in (Too see more details).
This function is only available for supported cameras.
There are 8 directions in PTZ control ring. If the camera
you connect support PTZ, you can use PTZ control ring
to change the direction that camera points to.
This function is only available for supported cameras.
Click this button to return the camera to „Home‟ (default)
position.
This function is only available for supported cameras.
Start video recording.
Software / camera configuration.
95
), click again to
).