Edimax IC-7010 Series Manual page 104

3-3-1-4 Motion Record
With this function activated, only motions captured by the camera will be
recorded, so you don‟t have to waste hard disk storage space on images you
don‟t need to pay attention to.
WARNING: For applications that security is highly concerned, it's not
recommended to use this function since some tiny changes you may
need to know may not be able to trigger the camera and the camera
will not start recording.
Here are the descriptions of all setting items:
Item
Channel
Enable
Disable
Recording Time
Invoke alarm
when motion is
triggered
Send mail when
Description
Select the channel number you wish to set.
Enable motion record function.
Disable motion record function.
Select the time duration that camera will record when a
motion has been detected from dropdown menu in
seconds.
Send an alarm when a motion has been detected by the
camera.
Send an email to a pre-defined address when a motion
104