Pan And Tilt; Preset Points - Edimax IC-7010 Series Manual

2.3 Pan and Tilt

This IP camera supports pan and tilt function, as you explored in last section.
You can also make the camera move automatically in pan and tilt menu by
defining a set of pre-defined path.
You can access this menu by clicking „PTZ‟ on the top of web management
interface.

2.3.1 Preset Points

You can define the camera position and save the position so you can recall the
position later again. This camera provides 9 memory slots; follow the following
instructions to move the camera and set a new preset point:
UPPER
LEFT
LEFT
LOWER
LEFT
DOWN
1. Select a memory slot from „Available Positions‟ dropdown menu first.
2. To move the camera, click the position of labeled text (not shown on image)
on the image to move the camera to the direction. You may need to set the
Pan / Tilt speed to a slower setting, so you can move the camera in a more
accurate manner.
UP
UPPER
RIGHT
RIGHT
LOWER
RIGHT
46